About Us Our Brands Our Products AcousticShell Portfolio JOCAVI Acoustic Simulator JOCAVI Radio FAQ Links AcousticShop Contact Us
Our Facebook Page Our Instagram Page Our YouTube Page Our LinkedIn Page Our Twitter feed
Cookies on our website
Our website, like many others, uses small files called cookies to help us customize your experience. We use cookies in our website for functions such as the hability to know if you've subscribed to our newsletter or not, or if you've accepted our cookies policy.
By continuing to use this website, you consent to our use of cookies on this device in accordance with our Cookies Policy, unless you have explicitly disabled them.
Close
Our website, like many others, uses small files called cookies to help us customize your experience.
We use cookies in our website for functions such as the hability to know if you've subscribed to our newsletter or not, or if you've accepted our cookies policy.
By closing this message, you consent to our use of cookies on this device in accordance with our Cookies Policy, unless you have explicitly disabled them.
Close
Go left
Go right
ABSTRACT
Basstrap
Description

The creation of this bass trap patent and its manufacturing method consists of a very solid metal box, on which a bitumen elastic layer on each of the two sides is applied. The resonator's absorbing surfaces are thin massive plates: the front one with high elasticity and low internal friction and the back plate with less elasticity causing a high internal friction. This combination creates an all-over solid connection through the metal box between the front and back plates. This compound forms a box sealed all around, closed to the air pressure, but opened to the sound. The front and the back plates do not prevent the entering of low frequencies from going inside the box interacting with a different air pressure. Like a tunable Helmholtz resonator, the membrane is excited by the resonance frequency and it vibrates so strong that the weight of the limp mass pushes and pulls the air cushion inside the box.

The ABSTRACT resonance box formula comprises two limp elastic masses separated by the distance between them, benefiting the isothermal compression, thus providing better sensibility by absorbing the low-end frequencies at very low sound pressure levels. This system is very sensitive, however, the louder the sound system is, pumping the volume up, the more absorption you can get. Consequently it is an incredible high-efficiency low-frequency absorber panel.

By using a simple air compressor device you are free to vary and change the internal air pressure, hence obtaining various different frequencies of absorption. The distance between the membranes varies according to the internal air pressure difference; for example with positive air pressurization we have a bigger distance and the air pressure superior to the original exterior pressure. As result, the frequency varies in accordance with the mentioned frequencies pattern.

In a more or less intense way, the problem of the low-frequencies control is widespread in most room types; This model is ideal for Concert venues, Auditoriums, Pavilions, studios, music rooms; these are the type of rooms that can greatly benefit from the integration of these acoustic modules, once they are the most effective and accurate way to intervene in solving the problems of low-frequencies.

Features
  • Uses 60% of recycled materials and 100% recyclable
  • Fire-resistance: Euroclass B (similar to old M1)
  • Variably tuned: 80Hz, 100Hz or 125Hz [>50Hz;<250Hz]
  • Peak absorption at Low Frequency:
    • nominal pressure = 0.85 / 80Hz
    • 8 mBar = 0.86 / 100Hz
    • 14 mBar = 0.88 / 125Hz
  • Package and Installation: individual and accessories included
  • Ideal for mid and large size halls
Go left
Go right
Available Finishings
Colour
Regular fabric:
motif finishing
Technical drawings
Product dimensions
Model Height Width Depth Weight
BSW100 100 cm (39.37") 100 cm (39.37") 20 cm (7.87) 24 kg (9.45 lbs)
BSW200 200 cm (78.74") 100 cm (39.37") 20 cm (7.87) 45 kg (17.72 lbs)
  Acoustic properties chart
SOME PROJECTS WHERE THE ABSTRACT WAS USED
Important notices

JOCAVI™ accepts no responsibility for any printing or display errors. Specifications can be modified without prior notice, if technical or commercial reasons do so require. The colours shown on this catalogue are only a reference and an illustration of the products finishing. The colours shown are not binding because brightness, contrast and colour balance may vary due to the printing process. Colours may vary due to raw-material suppliers' changes and some differences may occur in tonal range. Due to its natural origin, wood-based products will always present natural imperfections inherent to its organic nature. For similar reasons, they will also present traces of old-age in the course of time. Wood and Fabric products are highly susceptible to changes in its appearance with humidity and temperature. Colour examples shown are only for reference. JOCAVI™ cannot guarantee that the colours represented will exactly match the colours of the products shipped, due to the variances among different monitors and printers. Some colour variation may occur between production runs of Acoustic Foam products. Colour consistency in similar products is not guaranteed, some nuances can happen. Colour fading will occur with UV exposure over time. RAL is an international independent colour standard system partner for industry, trade, architecture and design and should be consulted before placing any order. Close attention must be paid to the storage conditions and the acclimatization before, during and after the installation. Typical Indoor Comfort Standards state a temperature range of 20°C - 27°C (68°F - 81°F), and a relative humidity of less than 60%. These would be considered as normal operational levels of JOCAVI™ product range.

JOCAVI™ products are fire retardant and/or self extinguishing to varying extents. Before purchasing any of our acoustic foam products, please check with your local fire marshal or building inspector for approval. We cannot guarantee that any product meets the specific building code regulations in your area/country as regulations widely vary from place to place. JOCAVI™ will not be held liable for property damage or injuries caused by the misuse of our products.

Given the fragility and sensitivity of the raw materials used in the ATP™ product range, we advise and recommend these products are not installed within reach of physical contact by people or objects. Physical contact may damage these products.

Sizes may slightly vary (+/- 3mm) due to their production method and some inherent raw-materials characteristics. Despite all the standard sizes of all products, some models can be customised upon previous consultation. Sizes may slighty vary due to their production method and some inherent raw-materials characteristics.

Product category name ribbon
Splitter image
Product name image
Product category name image
Click here to listen to our radio!
JOCAVI Radio