View web version in browser | Unsubscribe here
International | USA | Radio

JOCAVI will once again be present at the NAMM Show in Anaheim.

Celebrating its 26th anniversary, JOCAVI has launched its radio and will be launching a few new products at the NAMM Show 2019, 24 to 27 January 2019.

 

Come visit and us at booth #10321.

Email us at info@jocavi.net to book a meeting with us!

JOCAVI has launched, on its 26th anniversary, its brand new web radio, JOCAVI Radio.

Celebrating 26 years of an intense bond with the international music market, we are honoured to commemorate it and share an excellent music selection with our clients and friends.

João Vieira's private collection was scanned with the original CD file format (WAVE at 44.1kHz, 16bit per channel) and to ensure the best listening quality, it is being broadcast using HE-AAC at 192kbps at 48kHz.

It is now available, 24/7 at jocaviradio.com

The TONAL BXA® is a low frequency membrane absorbent panel designed to fit into 90° corners. Tuned to 50Hz, 63Hz or 80Hz, it has a range of absorption coverage of approximately 1/3 of octave above and below the tuning frequency. It is developed to fine tune the modal distribution of small rooms such as studio control rooms and home theatres.

The principle used to develop TONAL BXA is the Helmholtz Resonator reasoning with a defined neck length, using of a colored engineered wood fiber board box with HIPS fabric finishing as the front membrane, thus creating the tuned resonant chamber.

This model can be combined with TONAL BXW, in order to improve bass absorption. TONAL BXW is a model designed for flat surfaces like walls and ceilings. Together these panels broaden the range of the absorbed frequencies to the next harmonic frequency. This combination is one of the best ways to treat low-frequency problems in small and medium-sized rooms.

FEATURES
  • Tuned to 50Hz, 63Hz and 80Hz
  • Average absorption: 0.86/m2 [>50Hz;<250KHz]
  • Box made of Colored Engineered Wood Fiber Board
  • Front membrane made of HIPS with fabric covered finishing
  • Fire-resistance: Bs1
  • Application on ceiling and wall corners
  • Package: 2 units
  • Installation: accessories included
Available fabric colors

Absorption coefficients
  Tuned to 50Hz
  Tuned to 63Hz
  Tuned to 80Hz

HUMcut BXA is a low-frequency membrane absorption panel tuned to 63Hz that is meant to be used in 90º corners. The principle used in this model combines a HIPS box, which has an appropriately enhanced closed resonance chamber with mass and density components. The front plate is made of wood and has several punching patterns and colors available.

In order to achieve the best results, this model can be used together with the HUMcut BXW, tuned to 125Hz, used in flat surfaces. The combination of these two models, on the corners and walls, greatly broadens the low-frequencies absorption capacity as it extends the absorption range to the next harmonic frequency. This combination becomes one of the best offers for low-frequency absorbent acoustic treatment.

FEATURES
  • Tuned to 63Hz
  • Average absorption: 0.86/m2 [>50Hz;<250Hz]
  • Made of recyclable materials
  • Front plate of natural wood veneer
  • Fire-resistance: Bs1
  • Application on ceiling and wall 90º corners
  • Package: 2 units
  • Installation: Aluminum optional mounting accessories sold separately
Available wood veneer colors

Absorption coefficient
  Absorption coefficient

The use of diffusor panels is imperative to control primary reflections and other reflections from flat surfaces, thus improving correct sound diffusion in the room.

The WOODquad is a two-dimensional quadratic residue sound diffusor created to expand our product line anchored in classical designs. It is designed to provide a more uniform sound field through mid and high frequencies and offers us optimal hemispherical scattering for wide angles of incidence.

This wooden diffusion panel provides large spectrum bandwidth diffusion in a single integrated piece with minimal depth; it has the uniform scattering properties of a quadratic diffuser.

This panel is made of solid pinewood with a finish of six different colors of veneer. The wood stands out inside the rooms and makes this product look very attractive, both acoustically and aesthetically.

FEATURES
  • Manufactured with self-sustainable forest pine wood
  • 2D RQD reflection phase grating
  • Average diffusion: 0.63/m2 [>100Hz;<5000Hz]
  • Finished; Natural wood with ecological veneers
  • 100% recyclable
  • Package: 2 units
  • Application on ceiling and walls
  • Installation: accessories included
Available wood veneer colors

Diffusion and absorption coefficients
  Diffusion coefficient
  Absorption coefficient

JOCAVI® International

Av. Pedro Álvares Cabral
Sintra Estoril V - B18
2710-297 Sintra | Portugal

Phone: +351 21 924 30 97
www.jocavi.net
info@jocavi.net

JOCAVI™ USA Corporation

727 Commercial Ave, Unit H
Carlstadt, NJ 07072

Phone: +1 (973) 536 18 32
Cell: +1 (917) 294 34 11
www.jocaviusa.com
info@jocaviusa.com

© [currentyear] JOCAVI - All rights reserved.

This email was sent to [Email]. You are receiving this email because you have subscribed to our messages via our websites or during contacts during trade shows.

If you wish to unsubscribe to our email communications, please click here.

To ensure future delivery of email, add news@jocaviacousticpanels.com and news@jocaviusa.com to your address book, contacts, or safe senders list.

JOCAVI, JOCAVI USA, ATP, AcousticShell, ECOIso, Motif and IN and their respecfive logos are either registered trademarks or trademarks of JOCAVI.
All other trademarks are the property of their respective owners.

JOCAVI and its subsidiaries accept no responsibility for any printing or display errors. Specifications are subject to modification without any prior notice should there be any technical or commercial reasons.

Given the fragility and sensitivity of the raw materials used in the ATP® product range, we advise and recommend these products are not installed within reach of physical contact by people or objects. Physical contact may damage these products.

Colour examples shown are only for reference. JOCAVI and its subsidiaries cannot guarantee that the colours represented will match exactly with the colours of the products shipped due to the variances in different monitors and printers. Some colour variation may occur between production runs of acoustic foam products. Colour consistency in similar products is not guaranteed, some nuances can happen. Colour fading will occur with UV exposition over time.

JOCAVI products are fire retardant and/or self extinguishing to varying extents. Before purchasing any of our acoustic foam products, please check with your local fire marshal or building inspector for approval. We cannot guarantee that any product meets the specific building code regulations in your area/country as regulations widely vary from place to place. JOCAVI and its subsidiaries will not be held liable or accountable for property damage or injuries caused by the misuse of our products.

Typical Indoor Comfort Standards state a temperature range of 20ºC - 27ºC (68ºF - 81ºF), and a relative humidity of less than 60%. These would be considered as normal operational levels of ATP® products' range.

Despite all the standard sizes of all products, several of our models can be customized upon previous consultation.

Sizes may slightly vary due to their production method and some inherent raw-materials characteristics.

Specifications can be modified without prior notice, if technical or commercial reasons so require.