Size and Specifications
 
 
DESCRIPTION

SHOCK AB® is a wall and ceiling vibration absorber, a composite piece consisting of a molded metal frame and a damping rubber component, which allows to support the weight of the wall or ceiling, thereby minimizing physical contact to the support structure and forming the sound insulation layer between the sound wave irradiation and the original base surface, wall or ceiling.
The SHOCK® AB is provided in two models; one for the ceiling and one for the wall.
SHOCK® AB Ceiling is an effective way to cut off the structure-borne sound transmission of the suspended ceiling and the original building base.
SHOCK® AB Wall is suitable for installing and fixing the wall reinforced sound insulation layer structure.
The quantity of pieces to be used on each application depends on the weight of the insulation layer that will be applied, so it is recommended make the calculation, bearing in mind that it is considered an operating range of 40kg to 80kg per piece (fixation point).

FEATURES
SIZES AND SPECIFICATIONS
Dramatically improves the performance of your soundproofing layer.
Minimise physical and structure sound transmission.
Operating range of 40Kg to 80Kg per piece.
Application: using screws.
Can be applied in standard steel chains used in the construction with plasterboard.
Lifetime warranty.
Packaging: 20 pieces.
MODELS
MAXIMUM LOAD
CAPACITY RANGE (kg)
PACKAGE (units)
SHAC
40 Kg to 80 Kg
20 pcs


 
 
Size and Specifications

IMPORTANT NOTICES

• JOCAVI® accepts no responsibility for any printing errors. Specifications can be modified without prior notice, if technical or commercial reasons so require.
• The colours shown on this catalogue are only a reference and an illustration of the products finishing. The colours shown are not binding because brightness, contrast and colour balance may vary due to the printing process.
• Colours may vary due to raw-material suppliers' changes and some differences may occur in tonal range.